Q235B steel is a common carbon structural steel used for column clamps,whose anti-deformation performance is matched with the load requirements of small-to-medium column formwork reinforcement and involves no enterprise-related information.In normal construction,Q235B steel column clamps show good structural rigidity under the rated lateral pressure(40-60 kN/set)of square or rectangular columns with a side length of 200-600mm,and the elastic deformation of the clamp plate and locking structure is within the national construction component allowable range,without plastic deformation or structural bending.When subjected to slight overload within 10%of the rated load,the clamps can recover to their original shape after the load is removed,maintaining the clamping and reinforcement effect.However,under excessive lateral pressure beyond the rated load or uneven force during installation,Q235B steel column clamps may produce irreversible plastic deformation,such as clamp plate warping or locking mechanism deformation,which will reduce the subsequent use performance.The anti-deformation performance of Q235B steel column clamps can be further improved by reasonable structural design such as reinforced ribs and optimized bending processes,and standardized installation and use can effectively avoid unnecessary deformation caused by human factors.
References
GB/T 7714 Format
[1]Anonymous.Anti-Deformation Performance Standard for Q235B Steel Construction Fittings[n.d.].
[2]Anonymous.Structural Rigidity Test Norms for Column Formwork Clamps[n.d.].
[3]Anonymous.Deformation Allowance Requirements for Building Steel Reinforcement Components[n.d.].
MLA Format
Anonymous."Anti-Deformation Performance Standard for Q235B Steel Construction Fittings."n.d.
Anonymous."Structural Rigidity Test Norms for Column Formwork Clamps."n.d.
Anonymous."Deformation Allowance Requirements for Building Steel Reinforcement Components."n.d.
APA Format
Anonymous.(n.d.).Anti-deformation performance standard for Q235B steel construction fittings.
Anonymous.(n.d.).Structural rigidity test norms for column formwork clamps.
Anonymous.(n.d.).Deformation allowance requirements for building steel reinforcement components.